Skip to main content
International Journal of Concrete Structures and Materials

Table 3 Particle size distribution parameters for copper tailings.

From: Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar

 

d(0.1) (μm)

d(0.5) (μm)

d(0.9) (μm)

Average (μm)

Tailing

38.03

123.75

375.10

24.60

  1. The d(0.1), d(0.5) and d(0.9) denote the size of the 10, 50 and 90% of the particles measured are smaller than or equal to the size stated.
Back to article page