Skip to main content

Articles

Page 14 of 14

  1. The temperature distributions of concrete structures strongly depend on the value of thermal conductivity of concrete. However, the thermal conductivity of concrete varies according to the composition of the c...

    Authors: Jong-Han Lee, Jong-Jae Lee and Baik-Soon Cho
    Citation: International Journal of Concrete Structures and Materials 2012 6:16
  2. Concrete is an economical construction material and for that reason it is widely used in buildings and infrastructures. The use of deicing salts, expansion joint failure, and freeze–thaw cycles have led to con...

    Authors: Chris Ramseyer and Thomas H.-K. Kang
    Citation: International Journal of Concrete Structures and Materials 2012 6:19
  3. This article reviews the tailoring of engineered cementitious composites (ECC), a type of high performance fiber reinforced cementitious composites with a theoretical design basis, for special attributes or fu...

    Authors: Victor C. Li
    Citation: International Journal of Concrete Structures and Materials 2012 6:18

    The Erratum to this article has been published in International Journal of Concrete Structures and Materials 2012 7:s40069-012-0022-z

  4. An experimental investigation was conducted to compare the bond strength of reinforcing steel in self-consolidating concrete (SCC) with conventional concrete (CC). This study investigated two different compres...

    Authors: Trevor J. Looney, Mahdi Arezoumandi, Jeffery S. Volz and John J. Myers
    Citation: International Journal of Concrete Structures and Materials 2012 6:17
  5. The aim of this study is to assess the seismic performance of hollow reinforced concrete and prestressed concrete bridge columns, and to provide data for developing improved seismic design criteria. By using a...

    Authors: Tae-Hoon Kim, Dai-Jeong Seong and Hyun Mock Shin
    Citation: International Journal of Concrete Structures and Materials 2012 6:15
  6. In order to predict the neutralization of concrete which is the reaction of carbonation dioxide from the outside and cement hydration product, such as calcium hydroxide and C–S–H, it was studied the numerical ...

    Authors: Jae-Hong Park, Takuya Hasegawa, Osamu Senbu and Dong-Cheon Park
    Citation: International Journal of Concrete Structures and Materials 2012 6:14
  7. The aim of this study is to explore the possibility of re-cycling a waste material that is now produced in large quantities, while achieving an improvement of the mechanical properties and durability of the mo...

    Authors: Youcef Ghernouti and Bahia Rabehi
    Citation: International Journal of Concrete Structures and Materials 2012 6:13
  8. There is significant concern in the engineering community regarding the safety and effectiveness of fiber-reinforced polymer (FRP) strengthening of RC structures because of the potential for brittle debonding ...

    Authors: Thomas H.-K. Kang, Joe Howell, Sanghee Kim and Dong Joo Lee
    Citation: International Journal of Concrete Structures and Materials 2012 6:12
  9. This paper focuses on the finite element (FE) response sensitivity and reliability analyses considering smooth constitutive material models. A reinforced concrete frame is modeled for FE sensitivity analysis f...

    Authors: Md. Iftekharul Alam and Dookie Kim
    Citation: International Journal of Concrete Structures and Materials 2012 6:10
  10. The process of selecting a repair material is a typical one of multi-criteria decision-making (MCDM) problems. In this study Analytical Hierarch Process was applied to solve this MCDM problem. Many factors aff...

    Authors: Jeong-Yun Do and Doo-Kie Kim
    Citation: International Journal of Concrete Structures and Materials 2012 6:9
  11. This paper presents the differences in growth of time-dependent strain values in reinforced cement concrete (RCC) and pre-stressed concrete (PSC) flexural members through experiment. It was observed that at an...

    Authors: Swarup Rn. Debbarma and Showmen Saha
    Citation: International Journal of Concrete Structures and Materials 2012 6:8
  12. An experimental study was carried out to evaluate fresh properties of a moderately high-strength (high-flowing) self-compacting concrete (SCC) and to investigate shear behavior and performance of deep beams ma...

    Authors: Y. W. Choi, H. K. Lee, S. B. Chu, S. H. Cheong and W. Y. Jung
    Citation: International Journal of Concrete Structures and Materials 2012 6:7
  13. Sand-concrete is being researched for potential usage in construction in Saharan regions of Algeria, because of shortage in coarse aggregate resources. This research work deals with the effect of dune sand, av...

    Authors: Tayeb Bouziani, Madani Bederina and Mourad Hadjoudja
    Citation: International Journal of Concrete Structures and Materials 2012 6:6
  14. The main objectives of this research were to experimentally evaluate the impact of Carbon Fiber-Reinforced Polymers (CFRP) amount and strip spacing on the shear behavior of prestressed concrete (PC) beams and ...

    Authors: Thomas H. -K. Kang and Moustapha Ibrahim Ary
    Citation: International Journal of Concrete Structures and Materials 2012 6:5
  15. Fiber-Reinforced Polymers (FRP) are used to enhance the behavior of structural components in either shear or flexure. The research conducted in this paper was mainly focused on the shear-strengthening of reinf...

    Authors: Moustapha Ibrahim Ary and Thomas H. -K. Kang
    Citation: International Journal of Concrete Structures and Materials 2012 6:4
  16. Self-consolidating concrete (SCC) is a recently developed innovative construction material. SCC fills in a formwork without any vibrating consolidation, which allows us to eventually achieve robust casting. Ho...

    Authors: Seung Hee Kwon, Jae Hong Kim and Surendra P. Shah
    Citation: International Journal of Concrete Structures and Materials 2012 6:3
  17. In this study, three isolated interior flat slab-column connections that include three types of shear reinforcement details; stirrup, shear stud and shear band were tested under reversed cyclic lateral loading...

    Authors: Jin-Kyu Song, Jubum Kim, Ho-Bum Song and Jeong-Won Song
    Citation: International Journal of Concrete Structures and Materials 2012 6:2
  18. Observed wall damage in recent earthquakes in Chile and New Zealand, where modern building codes exist, exceeded expectations. In these earthquakes, structural wall damage included boundary crushing, reinforce...

    Authors: John W. Wallace
    Citation: International Journal of Concrete Structures and Materials 2012 6:1

Associated Society

e_logo_kci

International Journal of Concrete Structures and Materials is affiliated with Korea Concrete Institute.

Annual Journal Metrics

  • Citation Impact 2023
    Journal Impact Factor: 3.6
    5-year Journal Impact Factor: 3.8
    Source Normalized Impact per Paper (SNIP): 1.634
    SCImago Journal Rank (SJR): 1.061

    Speed 2023
    Submission to first editorial decision (median days): 24
    Submission to acceptance (median days): 129

    Usage 2023
    Downloads: 556,138
    Altmetric mentions: 19

Who reads the journal?

Learn more about the impact the International Journal of Concrete Structures and Materials has worldwide

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline