Skip to main content

Articles

Page 2 of 14

  1. Pervious concrete (PC) as a green infrastructure material has been increasingly used due to its positive environmental impacts, such as controlling storm water runoff, removing water pollutants and reducing he...

    Authors: Junyu Zhang, Haoran Sun, Xiaotian Shui and Wenxuan Chen
    Citation: International Journal of Concrete Structures and Materials 2023 17:64
  2. As known, calcium oxide (CaO) is an alkaline material, which can be used widely to increase the clay-containing soils load carrying capacity, to produce aerated concrete and calcium aluminate cement. In the la...

    Authors: Alaa M. Rashad
    Citation: International Journal of Concrete Structures and Materials 2023 17:72
  3. This research presents the numerical and experimental results of lateral cyclic loading applied on a two-story confined masonry structure utilizing local materials and standards. Two half-scale confined masonr...

    Authors: Mosaad El-Diasity, Sayed Salah, Mohamed O. R. El-Hariri, Amr A. Gamal and Tarik S. Elsalakawy
    Citation: International Journal of Concrete Structures and Materials 2023 17:70
  4. Fly ash (FA) is the most commonly used supplementary cementitious material in the world. However, the reactivity of FA varies substantially. In this study, new machine learning (ML) model has been developed to...

    Authors: Woo-Young Park and Juhyuk Moon
    Citation: International Journal of Concrete Structures and Materials 2023 17:58
  5. The world is facing the problem of depletion of natural sand and gravel resources, and a large amount of coal gangue solid waste is produced in Inner Mongolia, China, which has low utilization rate and causes ...

    Authors: Wen Li, Hailong Wang and Wenyan Zhang
    Citation: International Journal of Concrete Structures and Materials 2023 17:57
  6. Fracture parameters of fiber concrete (FC) are currently a hot research area. Fracture mechanics is the field of solid mechanics that helps to study the type and propagation of cracks in materials. It uses met...

    Authors: Ahmed M. Maglad, Walid Mansour, Bassam A. Tayeh, Mohamed Elmasry, Ahmed M. Yosri and Sabry Fayed
    Citation: International Journal of Concrete Structures and Materials 2023 17:74
  7. This study evaluated the setting time, mechanical properties and microstructure of Portland cement (OPC) by adding SiO2 nano- and micro-particles. The setting time was reduced due to the pozzolanic reaction of th...

    Authors: Won-Woo Kim and Jae-Heum Moon
    Citation: International Journal of Concrete Structures and Materials 2023 17:68
  8. A growing number of nations and regions have printed concrete structures thanks to the application of 3D printing technology in the field of civil engineering. However, the houses built with printed concrete a...

    Authors: Yanan Fu, Ying Zhang and Lei Wu
    Citation: International Journal of Concrete Structures and Materials 2023 17:56
  9. The past two decades have witnessed rapid advances in the use of fiber-reinforced polymer (FRP) composites in different engineering fields. Advantages such as high strength-to-weight ratio, corrosion resistanc...

    Authors: Ahmet Can Altunişik, Yunus Emrahan Akbulut, Süleyman Adanur, Murat Günaydin, Sara Mostofi and Ayman Mosallam
    Citation: International Journal of Concrete Structures and Materials 2023 17:55
  10. Accelerated bridge construction (ABC) has many advantages for bridge construction in modern society. While for ABC, the post-cast joint is always the weakest and most critical part. This paper presents a UHPC ...

    Authors: Shuwen Deng, Banfu Yan, Lian Shen, Mingxin Qin and Yina Jia
    Citation: International Journal of Concrete Structures and Materials 2023 17:71
  11. This study aims to investigate the effectiveness of para-aramid fiber sheet in enhancing the flexural performance of reinforced concrete (RC) beams made with Environmental-Friendly Recycled Coarse Aggregates. ...

    Authors: Jamshid Ruziev and Woosuk Kim
    Citation: International Journal of Concrete Structures and Materials 2023 17:63
  12. Composite rigid-frame bridges with steel girders have excellent structural performance, but behavioral inconsistency appears at the connection between the steel girder and concrete pier. In addition, composite...

    Authors: Sanghyeon Cho, Jungho Choi, Heeyoung Lee and Wonseok Chung
    Citation: International Journal of Concrete Structures and Materials 2023 17:54
  13. The main objective of this study is to develop an empirical model for predicting the chloride penetration into concrete exposed to the sea water along shorelines. Concrete mixed with 0–50% of palm oil fuel ash...

    Authors: Wichian Chalee, Amornchai Jaiyong, Tieng Cheewaket and Chai Jaturapitakkul
    Citation: International Journal of Concrete Structures and Materials 2023 17:53
  14. In recent years, constructing natural aggregates as a base layer for the roads has increased. Natural resources will run out as long as human consumption of them continues. Recycled concrete aggregate (RC) has...

    Authors: Ali Basha, Fatma khalifa and Sabry Fayed
    Citation: International Journal of Concrete Structures and Materials 2023 17:52
  15. Self-compacting concrete (SCC), which flows under its own weight without being compacted or vibrating, requires no outside mechanical force to move. But like normal concrete, SCC has a brittle character (weak ...

    Authors: Jawad Ahmad, Zhiguang Zhou and Ahmed Farouk Deifalla
    Citation: International Journal of Concrete Structures and Materials 2023 17:51
  16. Many scientists are now focusing their attention on the utilization of valuable industrial or agricultural wastes as the primary raw material for the construction sector. These wastes, on the other hand, are a...

    Authors: Jawad Ahmad, Mohamed Moafak Arbili, Muwaffaq Alqurashi, Fadi Althoey and Ahmed Farouk Deifalla
    Citation: International Journal of Concrete Structures and Materials 2023 17:61
  17. The use of complex modifiers for plain cement concrete mixtures and concrete is becoming increasingly popular in modern materials science. The article presents studies of the influence of a polymer additive st...

    Authors: Shilin Yang, Andrii Bieliatynskyi, Viacheslav Trachevskyi, Meiyu Shao and Mingyang Ta
    Citation: International Journal of Concrete Structures and Materials 2023 17:50
  18. In this paper, the effectiveness of the strengthening by a wooden plate for reinforced concrete (RC) beams that incorporate waste sawdust (SD) as a partial substitute for fine aggregate (sand) has been investi...

    Authors: Ahmed M. Maglad, Walid Mansour, Sabry Fayed, Bassam A. Tayeh, Ahmed M. Yosri and M. Hamad
    Citation: International Journal of Concrete Structures and Materials 2023 17:49
  19. One-part alkali-activated materials (OP-AAM) have become a promising binder with low carbon and energy requirements associated with superior mechanical and durability characteristics. This study aims to employ...

    Authors: M. Refaie, Alaa Mohsen, El-Sayed A. R. Nasr and Mohamed Kohail
    Citation: International Journal of Concrete Structures and Materials 2023 17:48
  20. As the number of heavy vehicles on the road continues to increase, collisions involving heavy vehicles and concrete median barriers (CMB) occur more frequently than in the past. Consequently, there is a growin...

    Authors: Yoseok Jeong, Ilkeun Lee, Jaeha Lee, Kyeongjin Kim, Geunhyeong Min and WooSeok Kim
    Citation: International Journal of Concrete Structures and Materials 2023 17:60
  21. The use of alternative and locally available materials is encouraged in the construction industry to improve its sustainability. Desert regions with shortages in freshwater and river sand as fine aggregates in...

    Authors: Pawel Sikora, Levent Afsar, Sundar Rathnarajan, Morteza Nikravan, Sang-Yeop Chung, Dietmar Stephan and Mohamed Abd Elrahman
    Citation: International Journal of Concrete Structures and Materials 2023 17:47
  22. This study is a part of the study to simplify the reinforcing details of reinforced concrete (RC) structural members by substituting the conventional reinforcement with hooked-end steel fibers (SFs). This pape...

    Authors: Seok-Joon Jang, Wan-Shin Park, Sun-Woo Kim, Dong-Hui Kim, Qi Wang, Woo-Jin Jeong, Ai-Hua Jin and Hyun-Do Yun
    Citation: International Journal of Concrete Structures and Materials 2023 17:46
  23. One of the major gaps in previous research on the mechanical behavior of ballasted railway tracks converted into slab tracks using the preplaced aggregate concrete technique is its durability against freezing ...

    Authors: Morteza Esmaeili, Sajad Behnajad and Milad Hossein Esfahani
    Citation: International Journal of Concrete Structures and Materials 2023 17:45
  24. The main objective of the present work is to evaluate using alkaline wastewater from pot factories (recycled NaOH solutions with variant concentrations and pH values) along with waste powders possessing pozzol...

    Authors: Sherif H. Al-Tersawy, Sahar E. Zakey, Rasha A. El-Sadany and Hossam El-Din M. Sallam
    Citation: International Journal of Concrete Structures and Materials 2023 17:44
  25. The axial compressive behavior of Ultra-High Strength Concrete (UHPC) columns reinforced with basalt bars was investigated in this work. Only a few research projects have used basalt Reinforced Concrete Column...

    Authors: Taha A. El-Sayed, Kareem S. Abdallah, Hossam E. Ahmed and Tamer H. El-Afandy
    Citation: International Journal of Concrete Structures and Materials 2023 17:43
  26. This study presented a meso-model for the fracture analysis of the reinforced concrete (RC) structure. A modeling method of RC meso-structure was proposed, and the rebars were allowed to separate from the conc...

    Authors: Zhanliang Wang, Wei Zhang and Yiqun Huang
    Citation: International Journal of Concrete Structures and Materials 2023 17:42
  27. The high-performance topping concrete overlay would significantly reduce the fatigue stresses at susceptible details of orthotropic steel deck (OSD) and effectively improve the fatigue performance. Full-scale ...

    Authors: Huawen Ye, Ao Huang, Chengchuan Jiang and Wenchao Wang
    Citation: International Journal of Concrete Structures and Materials 2023 17:41
  28. Headed cast-in specialty inserts are often developed and employed for their improved constructability and time-saving benefits over traditional cast-in and post-installed anchors. Their acceptance criteria (AC...

    Authors: Sang-Deock Jeong, Chang-Soo Oh and Chang-Hwan Lee
    Citation: International Journal of Concrete Structures and Materials 2023 17:40
  29. This study investigates the influence of steel and polyester fibers on the mechanical and durability properties of steel–polymer hybrid fiber reinforced concrete (HyFRC) and toughness under indirect tensile lo...

    Authors: Chella Gifta Christopher, Ramesh Gopal, Sasivaradhan Sadasivam, A. K. Devi Keerthika Esakki and P. Dinesh Kumar
    Citation: International Journal of Concrete Structures and Materials 2023 17:39
  30. This research proposed the modular prefabricated permanent formwork system made of ultra-high-performance concrete (UHPC). Two kinds of modular formwork shapes were designed: the flat formwork and the ribbed. ...

    Authors: Yibo Yang, Baixi Chen, Yong Chen, Huanyang Zhou, Fucai Liu, Xiangming Xie, Junsheng Chen, Wenying Guo and Hengchang Wang
    Citation: International Journal of Concrete Structures and Materials 2023 17:38
  31. The temperature stress in mass concrete structure is relatively high during construction, which usually leads to temperature cracks. To solve this problem, concrete blocks are usually placed by setting wide sl...

    Authors: Li Gao, Mei-Ling Zhuang, Fangzhi Zhu, Chuanzhi Sun and Jun Yang
    Citation: International Journal of Concrete Structures and Materials 2023 17:37
  32. Alkali-activated concrete (AAC) has attained great popularity since finding it as an alternative to Portland cement concrete due to its superior characteristics in terms of mechanical properties and durabilit...

    Authors: Ismail Amer, Mohamed Kohail, M. S. El-Feky, Ahmed Rashad and Mohamed A. Khalaf
    Citation: International Journal of Concrete Structures and Materials 2023 17:36
  33. This research aimed to estimate the shear capacity of reinforced concrete short beams with steel fiber (RSF short beams) using DIC (digital image correlation). Four-point bending tests of RSF short beams with ...

    Authors: Narawit Hemstapat, Kazumasa Okubo, Junichiro Niwa and Mitsuyasu Iwanami
    Citation: International Journal of Concrete Structures and Materials 2023 17:35
  34. The lack of adequate space for sewage sludge disposal has become a significant challenge in many countries. Landfilling and using sewage sludge as fertilizer in agricultural lands are the main methods for disp...

    Authors: Fazel Azarhomayun, Mohammad Haji, Mahdi Kioumarsi and Ali Kheyroddin
    Citation: International Journal of Concrete Structures and Materials 2023 17:34
  35. The main objective of the present research is to investigate the effect of adding wollastonite microfibers and waste tire rubber on the mechanical properties of concrete. For this purpose, two different series...

    Authors: Sina Lotfollahi, Alireza Jaidari, Parham Bakhtiari, Mojtaba Hosseini and Mohammad Ghorbani
    Citation: International Journal of Concrete Structures and Materials 2023 17:33
  36. This study examined the influence of the crystallinity of added nano-alumina on the sulfate resistance of ordinary Portland cement (OPC) paste. Two crystalline types of nano-aluminas (α-and γ-phase) were incor...

    Authors: Juan Yu, Sungwon Sim, Haemin Song, Dohoon Kim, Kyungcheol Jang, Dongho Jeon, Seung Cho and Jae Eun Oh
    Citation: International Journal of Concrete Structures and Materials 2023 17:32
  37. Fabric-reinforced cementitious matrix (FRCM) composites, also known as textile-reinforced mortars (TRMs), represent a new advancement in structural repair and reinforcement technology. Aiming to improve the en...

    Authors: Fayu Wang
    Citation: International Journal of Concrete Structures and Materials 2023 17:31

    The Publisher Correction to this article has been published in International Journal of Concrete Structures and Materials 2023 17:62

  38. This work focuses on the failure mechanisms of concrete hydroelectric facilities affected by alkali–aggregate reaction (AAR). Identification of potential failure mechanisms is based on an original “top-down ap...

    Authors: Mahdi Ben Ftima and Emre Yildiz
    Citation: International Journal of Concrete Structures and Materials 2023 17:30
  39. Recycling scrap tires provides an alternative source of fine aggregates for the production of rubberized concrete and this will lead to significant increase in concrete frost resistance, environmental protecti...

    Authors: Sheng Sun, Xiaoyan Han, Aijiu Chen, Qing Zhang, Zhihao Wang and Keliang Li
    Citation: International Journal of Concrete Structures and Materials 2023 17:28
  40. Testing of concrete panels subjected to pure in-plane shear loading is necessary to elucidate the shear behavior of concrete. However, available data for predicting the shear capacity and behavior of steel fib...

    Authors: Suyash K. Wagh, Agie Vianthi and Wen-Cheng Liao
    Citation: International Journal of Concrete Structures and Materials 2023 17:29
  41. Sand-bentonite-cement are commonly used as cut-off walls to isolate polluted soils or in ground improvement technologies and as retaining structures as secant pile wall. In this research, a laboratory program ...

    Authors: Ali Basha and Walid Mansour
    Citation: International Journal of Concrete Structures and Materials 2023 17:27
  42. This research uses WP to investigate the effect of two types of Shredded Waste Paper (SWP) comprising Shredded Copier Waste Paper (SCPWP) and Shredded Cardboard Waste Paper (SCBWP) as additives on the properti...

    Authors: B. A. Solahuddin and F. M. Yahaya
    Citation: International Journal of Concrete Structures and Materials 2023 17:26
  43. Self-compacting concrete (SCC) is also seen as unsustainable since it uses a lot of natural resources. Recent researchers have focused on lowering construction costs and partially replacing cement with industr...

    Authors: Jawad Ahmad, Zhiguang Zhou and Ahmed Farouk Deifalla
    Citation: International Journal of Concrete Structures and Materials 2023 17:25
  44. To investigate the application of iron tailings in cement-based materials as fine aggregate and mineral admixture, six iron tailings sands were selected from different places of origin, and the methods of acid...

    Authors: Lijuan Kong, Shuheng Xie, Caihui Wang and Lihuan Wang
    Citation: International Journal of Concrete Structures and Materials 2023 17:24
  45. Eco-friendly and durability of material has been the focuses of different researches; however, limited are considered both the nanomaterial and byproduct. Therefore, the aimed of this study is to investigate t...

    Authors: Prakash Arul Jose, Alexander Gladwin Alex, Tsegay Gebrehiwet and Srinivasan Murugan
    Citation: International Journal of Concrete Structures and Materials 2023 17:23
  46. In this essay, the progressive collapse resistance of the reinforced concrete wall-frame structures was evaluated with and without considering the soil–structure interaction. The vulnerability of the frames ag...

    Authors: Seyed Ali Ekrami Kakhki, Ali Kheyroddin and Alireza Mortezaei
    Citation: International Journal of Concrete Structures and Materials 2023 17:22
  47. In this study, 10 ferroconcrete concrete (FC) beams with lightweight cores reinforced with welded steel mesh as a shear reinforcement were evaluated under three-point bending tests along with two conventionall...

    Authors: Yousry B. Shaheen, Boshra A. Eltaly, Shaimaa G. Yousef and Sabry Fayed
    Citation: International Journal of Concrete Structures and Materials 2023 17:21
  48. The concept of external glass FRP composite confinement is a current process for strengthening concrete beams subjected to static loads. End anchorage glass FRP composites of 80 mm width and 90–130 mm length w...

    Authors: Djarir Yahiaoui, Abdelaziz Boutrid, Mohamed Saadi, Belgacem Mamen and Tayeb Bouzid
    Citation: International Journal of Concrete Structures and Materials 2023 17:20

Associated Society

e_logo_kci

International Journal of Concrete Structures and Materials is affiliated with Korea Concrete Institute.

Annual Journal Metrics

  • Citation Impact 2023
    Journal Impact Factor: 3.6
    5-year Journal Impact Factor: 3.8
    Source Normalized Impact per Paper (SNIP): 1.634
    SCImago Journal Rank (SJR): 1.061

    Speed 2023
    Submission to first editorial decision (median days): 24
    Submission to acceptance (median days): 129

    Usage 2023
    Downloads: 556,138
    Altmetric mentions: 19

Who reads the journal?

Learn more about the impact the International Journal of Concrete Structures and Materials has worldwide

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline