- Open Access
Correction to: Enhancing the Performance of Knee Beam–Column Joint Using Hybrid Fibers Reinforced Concrete
International Journal of Concrete Structures and Materials volume 16, Article number: 7 (2022)
Correction to: Int J Concr Struct Mater (2021) 15:20 https://doi.org/10.1186/s40069-021-00457-w
Following publication of the original article (Zainal et al., 2021), the authors identified several errors in the article:
dr. S. M. Iqbal S. Zainal is also affiliated to Department of Civil Engineering, Universiti Malaysia Sabah, 88400, Sabah, Malaysia.
The author group and the affiliations list are presented correctly in this correction article.
The legends of Figure 2 should be updated as below
Figure 2c—Casting of HyFRC on the beam–column joint region
Figure 2d—Strain gages installed on the steel reinforcements
Figure 2e—Moist-curing of the HyFRC specimens using wet burlap
In Table 10 the ‘Trend line equation’ and the ‘Correlation factor’ were merged. Below the correct version of the Table 10.
The original article (Zainal et al., 2021) has been corrected.
Zainal, S. M. I. S., Hejazi, F., & Rashid, R. S. M. (2021). Enhancing the performance of knee beam–column joint using hybrid fibers reinforced concrete. Int J Concr Struct Mater, 15, 20. https://doi.org/10.1186/s40069-021-00457-w
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Zainal, S.M.I.S., Hejazi, F. & Rashid, R.S.M. Correction to: Enhancing the Performance of Knee Beam–Column Joint Using Hybrid Fibers Reinforced Concrete. Int J Concr Struct Mater 16, 7 (2022). https://doi.org/10.1186/s40069-021-00489-2