Skip to main content

Articles

Page 1 of 13

  1. Beam-like members sustaining the combined action of transverse load and membrane force exhibit a special load response to progressive deflection. A theoretical model is therefore developed to depict the resist...

    Authors: Wanxiang Chen, Jiawen Cai, Junxuan Huang, Xiaoyu Yang and Jianjun Ma
    Citation: International Journal of Concrete Structures and Materials 2024 18:13
  2. In order to apply grouting material to the joints of fabricated buildings and make it meet the performance demands of low shrinkage, strong bond, and high toughness of joint materials for prefabricated buildin...

    Authors: Xiaoyong Luo, Qian Lu and Biwei Zhang
    Citation: International Journal of Concrete Structures and Materials 2024 18:12
  3. In typical steel fiber-reinforced concrete, the fibers are randomly distributed and oriented throughout the matrix, and a magnetic field can effectively align these randomly oriented fibers. To predict the ext...

    Authors: Nur Indah Mukharromah and Do Young Moon
    Citation: International Journal of Concrete Structures and Materials 2024 18:11
  4. This study was conducted to evaluate the seismic performance of an exterior precast concrete (PC) beam–column joint with ultra-high-performance fiber-reinforced concrete (UHPFRC). Currently, 45 MPa non-shrinka...

    Authors: Seungki Kim, Jinwon Shin and Woosuk Kim
    Citation: International Journal of Concrete Structures and Materials 2024 18:10
  5. Pavement engineers frequently employ concrete pavements because of their benefits such as extended lifetime, superior performance and durability, and so on. However, there are some disadvantages of these pavem...

    Authors: Masood Gholami, Fereidoon Moghadas Nejad and Amir Mohammad Ramezanianpour
    Citation: International Journal of Concrete Structures and Materials 2024 18:9
  6. In this paper, we present an investigation of the performance of reinforced concrete (RC) columns under combined bending loads and various axial forces using a finite element method (FEM) model developed with ...

    Authors: Sangwoo Kim, Yeongseok Jeong, Minho Kwon and Jinsup Kim
    Citation: International Journal of Concrete Structures and Materials 2024 18:8
  7. The composite concrete-encased steel (CCES) column member is made by the steel section embedded and covered in concrete from all sides. Due to the ability of the composite sections to bear heavy loads while us...

    Authors: Mostafa M. A. Mostafa
    Citation: International Journal of Concrete Structures and Materials 2024 18:7
  8. Under service conditions, R-UHPFRC (Reinforced Ultra High Performance Fiber Reinforced Cementitious composite) beams exhibit residual deflection after loading–unloading. This is due to the tensile strain harde...

    Authors: Bartłomiej Sawicki and Eugen Brühwiler
    Citation: International Journal of Concrete Structures and Materials 2024 18:6
  9. The structural performance of derailment containment provision (DCP) was investigated using a grid steel frame. The DCP which was installed within the gauge of a track was capable of resisting the impact loadi...

    Authors: Tae-Hoon Kim, Yun-Suk Kang and Choon-Seok Bang
    Citation: International Journal of Concrete Structures and Materials 2024 18:5
  10. This paper shows the relationship, in steel fiber-reinforced concrete, between fiber orientation and fatigue response through the combined use of computed tomography (CT), digital image processing (DIP) softwa...

    Authors: Dorys C. González, Álvaro Mena-Alonso, Jesús Mínguez, José A. Martínez and Miguel A. Vicente
    Citation: International Journal of Concrete Structures and Materials 2024 18:4
  11. In this study, the experimental findings of twenty pull-out tests on the bond efficiency of threaded/ribbed steel rods used in near-surface mounting (NSM) are presented. On a groove (20 × 20 mm) that was slott...

    Authors: Sabry Fayed, Emrah Madenci, Yasin Onuralp Özkiliç and Mohamed H. Zakaria
    Citation: International Journal of Concrete Structures and Materials 2024 18:3
  12. With the development of recycled aggregate concrete (RAC), the recovery rate of construction waste is improved, and the pollution problem is alleviated. In particular, RAC beams strengthened with prestressed c...

    Authors: Yanting Ji, Sheng Sun, Aijiu Chen, Fen Yang, Shihua Bai and Xiaoyan Han
    Citation: International Journal of Concrete Structures and Materials 2024 18:2
  13. In the context of a sustainable use of resources with the aim of the reduction of the CO2 footprint, the development of alternative concrete materials has attracted a great deal of attention. In this context, geo...

    Authors: Felix Dathe and Frank Dehn
    Citation: International Journal of Concrete Structures and Materials 2024 18:1
  14. The crack pattern of steel reinforced ultrahigh performance concrete (UHPC) beam is usually characterized by many densely distributed fine cracks (i.e., multiple microcracks) along with localized macrocrack, a...

    Authors: Yanping Zhu, Yang Zhang, Xinzhe Yuan and Changgui Hou
    Citation: International Journal of Concrete Structures and Materials 2023 17:73
  15. Previous studies have revealed that the contribution of slab reinforcement to the T-beam flexural strength in negative moment regions are not negligible for the seismic capacity design. An effective slab width...

    Authors: Zhamilya Mamesh, Dilnura Sailauova, Dichuan Zhang, Hyunjin Ju, Deuckhang Lee and Jong Kim
    Citation: International Journal of Concrete Structures and Materials 2023 17:69
  16. Use of high-cost raw materials such as quartz sand can limit wider application of ultra-high performance concrete in concrete construction. In this experimental study, recycled sand was used to fabricate ultra...

    Authors: Donguk Choi, Kyungchan Hong, Munkhtuvshin Ochirbud, Didar Meiramov and Piti Sukontaskuul
    Citation: International Journal of Concrete Structures and Materials 2023 17:67
  17. The use of nondestructive techniques in the technological control of concrete allows to evaluate and monitor the condition of the material without interfering with its properties; therefore, it is highly desir...

    Authors: Rodrigo Rogerio Cerqueira da Silva, Raquel Gonçalves and Cinthya Bertoldo
    Citation: International Journal of Concrete Structures and Materials 2023 17:66
  18. Supplementary cementitious materials (SCMs) such as fly ash and ground granulated blast furnace slag (GGBFS) are found to control the maximum temperature and the accompanying thermal gradients effectively. How...

    Authors: Yingda Zhang
    Citation: International Journal of Concrete Structures and Materials 2023 17:65
  19. Pervious concrete (PC) as a green infrastructure material has been increasingly used due to its positive environmental impacts, such as controlling storm water runoff, removing water pollutants and reducing he...

    Authors: Junyu Zhang, Haoran Sun, Xiaotian Shui and Wenxuan Chen
    Citation: International Journal of Concrete Structures and Materials 2023 17:64
  20. As known, calcium oxide (CaO) is an alkaline material, which can be used widely to increase the clay-containing soils load carrying capacity, to produce aerated concrete and calcium aluminate cement. In the la...

    Authors: Alaa M. Rashad
    Citation: International Journal of Concrete Structures and Materials 2023 17:72
  21. This research presents the numerical and experimental results of lateral cyclic loading applied on a two-story confined masonry structure utilizing local materials and standards. Two half-scale confined masonr...

    Authors: Mosaad El-Diasity, Sayed Salah, Mohamed O. R. El-Hariri, Amr A. Gamal and Tarik S. Elsalakawy
    Citation: International Journal of Concrete Structures and Materials 2023 17:70
  22. Fly ash (FA) is the most commonly used supplementary cementitious material in the world. However, the reactivity of FA varies substantially. In this study, new machine learning (ML) model has been developed to...

    Authors: Woo-Young Park and Juhyuk Moon
    Citation: International Journal of Concrete Structures and Materials 2023 17:58
  23. The world is facing the problem of depletion of natural sand and gravel resources, and a large amount of coal gangue solid waste is produced in Inner Mongolia, China, which has low utilization rate and causes ...

    Authors: Wen Li, Hailong Wang and Wenyan Zhang
    Citation: International Journal of Concrete Structures and Materials 2023 17:57
  24. Fracture parameters of fiber concrete (FC) are currently a hot research area. Fracture mechanics is the field of solid mechanics that helps to study the type and propagation of cracks in materials. It uses met...

    Authors: Ahmed M. Maglad, Walid Mansour, Bassam A. Tayeh, Mohamed Elmasry, Ahmed M. Yosri and Sabry Fayed
    Citation: International Journal of Concrete Structures and Materials 2023 17:74
  25. This study evaluated the setting time, mechanical properties and microstructure of Portland cement (OPC) by adding SiO2 nano- and micro-particles. The setting time was reduced due to the pozzolanic reaction of th...

    Authors: Won-Woo Kim and Jae-Heum Moon
    Citation: International Journal of Concrete Structures and Materials 2023 17:68
  26. A growing number of nations and regions have printed concrete structures thanks to the application of 3D printing technology in the field of civil engineering. However, the houses built with printed concrete a...

    Authors: Yanan Fu, Ying Zhang and Lei Wu
    Citation: International Journal of Concrete Structures and Materials 2023 17:56
  27. The past two decades have witnessed rapid advances in the use of fiber-reinforced polymer (FRP) composites in different engineering fields. Advantages such as high strength-to-weight ratio, corrosion resistanc...

    Authors: Ahmet Can Altunişik, Yunus Emrahan Akbulut, Süleyman Adanur, Murat Günaydin, Sara Mostofi and Ayman Mosallam
    Citation: International Journal of Concrete Structures and Materials 2023 17:55
  28. Accelerated bridge construction (ABC) has many advantages for bridge construction in modern society. While for ABC, the post-cast joint is always the weakest and most critical part. This paper presents a UHPC ...

    Authors: Shuwen Deng, Banfu Yan, Lian Shen, Mingxin Qin and Yina Jia
    Citation: International Journal of Concrete Structures and Materials 2023 17:71
  29. This study aims to investigate the effectiveness of para-aramid fiber sheet in enhancing the flexural performance of reinforced concrete (RC) beams made with Environmental-Friendly Recycled Coarse Aggregates. ...

    Authors: Jamshid Ruziev and Woosuk Kim
    Citation: International Journal of Concrete Structures and Materials 2023 17:63
  30. Composite rigid-frame bridges with steel girders have excellent structural performance, but behavioral inconsistency appears at the connection between the steel girder and concrete pier. In addition, composite...

    Authors: Sanghyeon Cho, Jungho Choi, Heeyoung Lee and Wonseok Chung
    Citation: International Journal of Concrete Structures and Materials 2023 17:54
  31. The main objective of this study is to develop an empirical model for predicting the chloride penetration into concrete exposed to the sea water along shorelines. Concrete mixed with 0–50% of palm oil fuel ash...

    Authors: Wichian Chalee, Amornchai Jaiyong, Tieng Cheewaket and Chai Jaturapitakkul
    Citation: International Journal of Concrete Structures and Materials 2023 17:53
  32. In recent years, constructing natural aggregates as a base layer for the roads has increased. Natural resources will run out as long as human consumption of them continues. Recycled concrete aggregate (RC) has...

    Authors: Ali Basha, Fatma khalifa and Sabry Fayed
    Citation: International Journal of Concrete Structures and Materials 2023 17:52
  33. Self-compacting concrete (SCC), which flows under its own weight without being compacted or vibrating, requires no outside mechanical force to move. But like normal concrete, SCC has a brittle character (weak ...

    Authors: Jawad Ahmad, Zhiguang Zhou and Ahmed Farouk Deifalla
    Citation: International Journal of Concrete Structures and Materials 2023 17:51
  34. Many scientists are now focusing their attention on the utilization of valuable industrial or agricultural wastes as the primary raw material for the construction sector. These wastes, on the other hand, are a...

    Authors: Jawad Ahmad, Mohamed Moafak Arbili, Muwaffaq Alqurashi, Fadi Althoey and Ahmed Farouk Deifalla
    Citation: International Journal of Concrete Structures and Materials 2023 17:61
  35. The use of complex modifiers for plain cement concrete mixtures and concrete is becoming increasingly popular in modern materials science. The article presents studies of the influence of a polymer additive st...

    Authors: Shilin Yang, Andrii Bieliatynskyi, Viacheslav Trachevskyi, Meiyu Shao and Mingyang Ta
    Citation: International Journal of Concrete Structures and Materials 2023 17:50
  36. In this paper, the effectiveness of the strengthening by a wooden plate for reinforced concrete (RC) beams that incorporate waste sawdust (SD) as a partial substitute for fine aggregate (sand) has been investi...

    Authors: Ahmed M. Maglad, Walid Mansour, Sabry Fayed, Bassam A. Tayeh, Ahmed M. Yosri and M. Hamad
    Citation: International Journal of Concrete Structures and Materials 2023 17:49
  37. One-part alkali-activated materials (OP-AAM) have become a promising binder with low carbon and energy requirements associated with superior mechanical and durability characteristics. This study aims to employ...

    Authors: M. Refaie, Alaa Mohsen, El-Sayed A. R. Nasr and Mohamed Kohail
    Citation: International Journal of Concrete Structures and Materials 2023 17:48
  38. As the number of heavy vehicles on the road continues to increase, collisions involving heavy vehicles and concrete median barriers (CMB) occur more frequently than in the past. Consequently, there is a growin...

    Authors: Yoseok Jeong, Ilkeun Lee, Jaeha Lee, Kyeongjin Kim, Geunhyeong Min and WooSeok Kim
    Citation: International Journal of Concrete Structures and Materials 2023 17:60
  39. The use of alternative and locally available materials is encouraged in the construction industry to improve its sustainability. Desert regions with shortages in freshwater and river sand as fine aggregates in...

    Authors: Pawel Sikora, Levent Afsar, Sundar Rathnarajan, Morteza Nikravan, Sang-Yeop Chung, Dietmar Stephan and Mohamed Abd Elrahman
    Citation: International Journal of Concrete Structures and Materials 2023 17:47
  40. This study is a part of the study to simplify the reinforcing details of reinforced concrete (RC) structural members by substituting the conventional reinforcement with hooked-end steel fibers (SFs). This pape...

    Authors: Seok-Joon Jang, Wan-Shin Park, Sun-Woo Kim, Dong-Hui Kim, Qi Wang, Woo-Jin Jeong, Ai-Hua Jin and Hyun-Do Yun
    Citation: International Journal of Concrete Structures and Materials 2023 17:46
  41. One of the major gaps in previous research on the mechanical behavior of ballasted railway tracks converted into slab tracks using the preplaced aggregate concrete technique is its durability against freezing ...

    Authors: Morteza Esmaeili, Sajad Behnajad and Milad Hossein Esfahani
    Citation: International Journal of Concrete Structures and Materials 2023 17:45
  42. The main objective of the present work is to evaluate using alkaline wastewater from pot factories (recycled NaOH solutions with variant concentrations and pH values) along with waste powders possessing pozzol...

    Authors: Sherif H. Al-Tersawy, Sahar E. Zakey, Rasha A. El-Sadany and Hossam El-Din M. Sallam
    Citation: International Journal of Concrete Structures and Materials 2023 17:44
  43. The axial compressive behavior of Ultra-High Strength Concrete (UHPC) columns reinforced with basalt bars was investigated in this work. Only a few research projects have used basalt Reinforced Concrete Column...

    Authors: Taha A. El-Sayed, Kareem S. Abdallah, Hossam E. Ahmed and Tamer H. El-Afandy
    Citation: International Journal of Concrete Structures and Materials 2023 17:43
  44. This study presented a meso-model for the fracture analysis of the reinforced concrete (RC) structure. A modeling method of RC meso-structure was proposed, and the rebars were allowed to separate from the conc...

    Authors: Zhanliang Wang, Wei Zhang and Yiqun Huang
    Citation: International Journal of Concrete Structures and Materials 2023 17:42
  45. The high-performance topping concrete overlay would significantly reduce the fatigue stresses at susceptible details of orthotropic steel deck (OSD) and effectively improve the fatigue performance. Full-scale ...

    Authors: Huawen Ye, Ao Huang, Chengchuan Jiang and Wenchao Wang
    Citation: International Journal of Concrete Structures and Materials 2023 17:41
  46. Headed cast-in specialty inserts are often developed and employed for their improved constructability and time-saving benefits over traditional cast-in and post-installed anchors. Their acceptance criteria (AC...

    Authors: Sang-Deock Jeong, Chang-Soo Oh and Chang-Hwan Lee
    Citation: International Journal of Concrete Structures and Materials 2023 17:40
  47. This study investigates the influence of steel and polyester fibers on the mechanical and durability properties of steel–polymer hybrid fiber reinforced concrete (HyFRC) and toughness under indirect tensile lo...

    Authors: Chella Gifta Christopher, Ramesh Gopal, Sasivaradhan Sadasivam, A. K. Devi Keerthika Esakki and P. Dinesh Kumar
    Citation: International Journal of Concrete Structures and Materials 2023 17:39
  48. This research proposed the modular prefabricated permanent formwork system made of ultra-high-performance concrete (UHPC). Two kinds of modular formwork shapes were designed: the flat formwork and the ribbed. ...

    Authors: Yibo Yang, Baixi Chen, Yong Chen, Huanyang Zhou, Fucai Liu, Xiangming Xie, Junsheng Chen, Wenying Guo and Hengchang Wang
    Citation: International Journal of Concrete Structures and Materials 2023 17:38

Associated Society

e_logo_kci

International Journal of Concrete Structures and Materials is affiliated with Korea Concrete Institute.

Annual Journal Metrics

  • 2022 Citation Impact
    3.4 - 2-year Impact Factor
    3.6 - 5-year Impact Factor
    1.721 - SNIP (Source Normalized Impact per Paper)
    0.871 - SJR (SCImago Journal Rank)

    2022 Speed
    17 days submission to first editorial decision for all manuscripts (Median)
    70 days submission to accept (Median)

    2022 Usage 
    428,229 downloads
    3 Altmetric mentions

Who reads the journal?

Learn more about the impact the International Journal of Concrete Structures and Materials has worldwide

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline