Skip to main content

Articles

Page 1 of 11

  1. The volume of waste materials and by products are increasing and endangering the environment safety. Some of these waste materials can be used in the production of building materials, such as concrete. In orde...

    Authors: Parween Latif Aziz and Mohammed R. Abdulkadir
    Citation: International Journal of Concrete Structures and Materials 2022 16:56
  2. In the construction of concrete bridges, the lighter dead load of decks can significantly reduce the number or size of substructure members, such as girders, piers and foundations. Although, the arch decks (AD...

    Authors: Dal-Hun Yang, Seung-Jai Choi, Sung-Jae Kim and Jang-Ho Jay Kim
    Citation: International Journal of Concrete Structures and Materials 2022 16:60
  3. The current study aimed to investigate the influence of the expired hardened cement blended with ground granulated blast furnace slag on the bond, microstructure, and durability of high-strength concrete (HSC)...

    Authors: Ashenafi Tofu Chofore, Bahiru Bewket Mitikie and Abenezer Tariku Haile
    Citation: International Journal of Concrete Structures and Materials 2022 16:70
  4. A better understanding of the tensile performance and tensile failure mechanism of cement paste is significant in preventing rock reinforcement failure. Therefore, this paper aims to reveal the tensile perform...

    Authors: Jianhang Chen, Kangming Tao, Banquan Zeng, Lei Liu, Hongbao Zhao, Junwen Zhang and Danqi Li
    Citation: International Journal of Concrete Structures and Materials 2022 16:61
  5. To mitigate environmental challenges, such as urban flooding, noise pollution, and the urban heat island effect, pervious concrete has been developed. This research was intended to develop pervious concrete ma...

    Authors: Yanchen Oinam, Suhawn Ju, Seongwoo Gwon, Myoungsu Shin and Sukhoon Pyo
    Citation: International Journal of Concrete Structures and Materials 2022 16:62
  6. Concrete industry is challenged by sustainability and technical concerns. Sustainability includes minimization of raw material usage, energy consumption, and emission of greenhouse gases, while technical conce...

    Authors: Emad S. Bakhoum and Yasser M. Mater
    Citation: International Journal of Concrete Structures and Materials 2022 16:63
  7. This study investigated the deteriorations of precast prestressed concrete (PSC) ties that were used for 15 years in high-speed railways in Korea and its damaging mechanism. The collected PSC ties with longitu...

    Authors: Dongho Jeon, Juan Yu, Jihwan Kim, Seyoon Yoon, Younghoon Bae and Jae Eun Oh
    Citation: International Journal of Concrete Structures and Materials 2022 16:57
  8. This research was conducted to examine the potential of basaltic crusher dust as a partial replacement for Portland Pozzolana cement in hollow concrete block (HCB) production. Quarry dust is one of the waste m...

    Authors: Bahiru Bewket Mitikie, Yohannis Lemma Alemu and Shumet Getahun Reda
    Citation: International Journal of Concrete Structures and Materials 2022 16:55
  9. To prevent damage to shaft walls in mines due to uneven loading, the mechanical properties of a shaft wall structure made of hybrid-fiber-reinforced concrete were studied. First, through orthogonal testing, th...

    Authors: Zhishu Yao, Yongjie Xu, Ping Zhang, Yu Fang, Chen Wang, Naihao Diao and Kun Hu
    Citation: International Journal of Concrete Structures and Materials 2022 16:54
  10. The correlation between surface electrical resistivity and modulus of elasticity of fiber-reinforced concrete (FRC) was studied within early ages in this study as a novel nondestructive method for predicting t...

    Authors: Daniel Castillo, Saman Hedjazi and Ehsanul Kabir
    Citation: International Journal of Concrete Structures and Materials 2022 16:53
  11. Based on the conceptual design of an advanced wind turbine tower system, use of ultra-high-performance cementitious composites material with compressive strength of 200 MPa (UHPC-200) is proposed to ensure hig...

    Authors: Xiangguo Wu, Xuesen Zhang, Hom Bahadur Bhattarai, Hyeon-Jong Hwang, Jing Yang and Soonpil Kang
    Citation: International Journal of Concrete Structures and Materials 2022 16:52
  12. In this study, a modified Artificial Neural Network (ANN) and Support Vector Regression (SVR) with three different optimization algorithms (Genetic, Salp Swarm and Grasshopper) were used to establish an accura...

    Authors: Amirreza Kandiri, Pshtiwan Shakor, Rawaz Kurda and Ahmed Farouk Deifalla
    Citation: International Journal of Concrete Structures and Materials 2022 16:64
  13. The amendment of cementitious binders with waste materials aids as a path to reduce the volume of waste and carbon emission. This review summarizes the current state of practice for cementitious binder fabrica...

    Authors: Prabhat Vashistha, Sungwoo Park and Sukhoon Pyo
    Citation: International Journal of Concrete Structures and Materials 2022 16:51
  14. In order to improve the construction technology level of the connection nodes of prefabricated buildings and improve the mechanical properties, fluidity and economy of the connection mortar, this paper adopts ...

    Authors: Chengbin Yuan, Yu Cai, Qiang Gu and Di Sang
    Citation: International Journal of Concrete Structures and Materials 2022 16:50
  15. Bond–slip is an important characteristic that determines the stiffness, displacement, and load-bearing capacity of a reinforced concrete (RC) beam. It is essential for performing a precise numerical analysis o...

    Authors: Hoseong Jeong, Seongwoo Ji, Jae Hyun Kim, Seung-Ho Choi, Inwook Heo and Kang Su Kim
    Citation: International Journal of Concrete Structures and Materials 2022 16:49
  16. The objective of the present study is to examine the effects of different types and content of steel fibers on the workability, mechanical properties, and ductility enhancement of lightweight aggregate concret...

    Authors: Keun-Hyeok Yang, Hak-Young Kim and Hye-Jin Lee
    Citation: International Journal of Concrete Structures and Materials 2022 16:48
  17. Tricalcium oxy silicate (C3S) and dicalcium silicate (C2S) are the major constituents of cement. In this study, the reactivity of polymorphs of calcium silicates is quantitatively investigated using Density Funct...

    Authors: Seungchan Kim, Yangwoo Lee, J. Plank and Juhyuk Moon
    Citation: International Journal of Concrete Structures and Materials 2022 16:46
  18. HTRB630 steel bar is a new type of high-strength steel bars. To study the seismic performance and promote the application of concrete columns reinforced with HTRB630 high-strength steel bars, the pseudo-static...

    Authors: Chuanzhi Sun, Mei-Ling Zhuang and Bo Dong
    Citation: International Journal of Concrete Structures and Materials 2022 16:45
  19. In the past, the salt freezing test does not often accord with the actual service environment of engineering, thus, we designed a test method of single-side salt-freezing–drying–wetting cycles. The mechanical ...

    Authors: Hao Zeng, Jin Zhang, Yang Li, Xin Su, CongZhi Gu and Kai Zhang
    Citation: International Journal of Concrete Structures and Materials 2022 16:44
  20. Lightweight concrete (LWC) is one of the most important building materials nowadays. Many research studies were focused on LWC produced using lightweight aggregates. However, limited work was cited for LWC pro...

    Authors: Wael M. Montaser, Ibrahim G. Shaaban, Amr H. Zaher, Sadaqat U. Khan and Mustafa N. Sayed
    Citation: International Journal of Concrete Structures and Materials 2022 16:59
  21. The dynamic response properties of concrete have been of interest during the use of buildings due to seismic, impact, and explosion events. The splitting Hopkinson lever is a classical device for testing the d...

    Authors: Xudong Chen, Jin Wu, Kai Shang, Yingjie Ning and Lihui Bai
    Citation: International Journal of Concrete Structures and Materials 2022 16:58
  22. The linear complementarity problem (LCP) approach, expedited by using the simple rigid–plastic theory, has been utilized successfully in predicting the numerical response of the ductile steel or concrete struc...

    Authors: Azam Khan, Moiz Tariq, Asad Ullah and Arshad Hussain
    Citation: International Journal of Concrete Structures and Materials 2022 16:47
  23. Pioneering studies have been conducted on alternative cementitious material in the manufacturing of conventional concrete to reduce carbon emission and improve the overall efficacy. However, there are limited ...

    Authors: Alexander Gladwin Alex, Tsegay Gebrehiwet Tewele, Zeyneb Kemal and Ramesh Babu Subramanian
    Citation: International Journal of Concrete Structures and Materials 2022 16:40
  24. The bond–slip model plays an important role in the structural analysis of reinforced concrete structures. However, many factors affect the bond–slip behavior, which means that a large number of tests are requi...

    Authors: Chengwen Zhang, Qing Chun, Ao Sun, Yijie Lin and HaoYu Wang
    Citation: International Journal of Concrete Structures and Materials 2022 16:41
  25. In this essay, to investigate the progressive collapse of the reinforced concrete (RC) frames, a nonlinear static pushdown analysis was performed with column removal scenarios from the first story. At first, a...

    Authors: Seyed Ali Ekrami Kakhki, Ali Kheyroddin and Alireza Mortezaei
    Citation: International Journal of Concrete Structures and Materials 2022 16:38
  26. With the fast growth of high-speed rail in recent years, derailment has become the first hidden danger of high-speed rail transportation. The high-speed train passes near the station building. So the train may...

    Authors: Khalil AL-Bukhaiti, Liu Yanhui, Zhao Shichun, Hussein Abas, Xu Nan, Yang Lang, Yan Xing Yu and Han Daguang
    Citation: International Journal of Concrete Structures and Materials 2022 16:39
  27. In this paper, numerous experimental tests were carried out to study the behavior of concrete containing glass fibers and confined with glass fiber-reinforced polymer (GFRP). Concrete specimens containing diff...

    Authors: Djarir Yahiaoui, Mohamed Saadi and Tayeb Bouzid
    Citation: International Journal of Concrete Structures and Materials 2022 16:37
  28. To overcome the drawbacks caused by the intrinsic brittleness of cementitious materials, various types of fibres were incorporated as reinforcements. Extensive research on Ordinary Portland cement indicated th...

    Authors: Hu Feng, Qi Shao, Xupei Yao, Lulu Li and Chengfang Yuan
    Citation: International Journal of Concrete Structures and Materials 2022 16:35
  29. This paper presents the influence of the graphene oxide (GO) sheet contents at conditions of 0, 0.01, 0.03, 0.05, and 0.1 wt% on the mechanical and thermal properties of GO/CAST 11 LW mortar (GMT) composites f...

    Authors: Thidatip Janjaroen, Sunisar Khammahong, Wattana Tuichai, Attaphol Karaphun, Chaiwat Phrompet, Chaval Sriwong and Chesta Ruttanapun
    Citation: International Journal of Concrete Structures and Materials 2022 16:34
  30. The purpose of this study is to investigate the effect of fire-damaged areas associated with wall width on the axial strength of fire-damaged reinforced concrete (RC) walls. Toward that goal, Finite Element (F...

    Authors: Yeonju Chun, Eunmi Ryu, Yeokyeong Lee, Heesun Kim and Yeongsoo Shin
    Citation: International Journal of Concrete Structures and Materials 2022 16:32
  31. Firstly, according to the theoretical analysis, the force mechanism and failure modes were assured for the bond behavior between grout and steel rebar. Then, a pull-out experiment was exerted to probe the bond...

    Authors: Liang-Lin Liu, Chun-Yong Luo, Lu-Xia Ouyang, Zhen-Hua Xia and Wei-Hua Li
    Citation: International Journal of Concrete Structures and Materials 2022 16:36
  32. The flexural behavior of basalt fiber (BF)/polypropylene fiber (PF)-reinforced concrete (BPRC) was investigated. When the content of BF and PF is 0.1%, the addition of fibers increases the compressive strength...

    Authors: Qiang Fu, Zhaorui Zhang, Wenrui Xu, Xu Zhao, Lu Zhang, Yan Wang and Ditao Niu
    Citation: International Journal of Concrete Structures and Materials 2022 16:31
  33. Recently, new materials and methods have been implemented to improve the performance of reinforced concrete columns. This paper studies experimentally the behavior of reinforced high-strength columns, with add...

    Authors: Morteza Bastami, Ahmad Elmi Mousavi and Mostafa Abbasnejadfard
    Citation: International Journal of Concrete Structures and Materials 2022 16:30
  34. Acoustic Emission (AE) application for Structural Health Monitoring (SHM) has undergone a swift advance through research and innovation in recent times. The AE monitoring is widely exploited as a tool for dama...

    Authors: Sakhiah Abdul Kudus, Norazura Muhamad Bunnori, Nur Kamaliah Mustaffa and Adiza Jamadin
    Citation: International Journal of Concrete Structures and Materials 2022 16:29
  35. The use of reinforced concrete is common in marine structures. Failure of reinforcement due to corrosion has detrimental impacts on nearly all of these structures. Hence, proposing an accurate and reliable mod...

    Authors: Gholam Reza Khayati, Zahra Rajabi, Maryam Ehteshamzadeh and Hadi Beirami
    Citation: International Journal of Concrete Structures and Materials 2022 16:28
  36. This study investigated the physical properties and electromagnetic pulse (EMP) shielding performance of cement paste containing small-diameter carbon fibers to develop an EMP-shielding cement. Small-diameter ...

    Authors: Tae-Beom Min and Hyeong-Kyu Cho
    Citation: International Journal of Concrete Structures and Materials 2022 16:27
  37. Reinforced concrete structural walls (RCSWs) are one of the most efficient lateral force-resisting systems used in buildings, providing sufficient strength, stiffness, and deformation capacities to withstand t...

    Authors: Mohammad Sadegh Barkhordari and Leonardo M. Massone
    Citation: International Journal of Concrete Structures and Materials 2022 16:33
  38. In general, concrete behaves differently when the load is applied at a different speed, i.e. concrete’s mechanical parameters are strain-rate sensitive. There is a need for an experimental method that should m...

    Authors: Petr Konrád and Radoslav Sovják
    Citation: International Journal of Concrete Structures and Materials 2022 16:26
  39. Scholars have studied the impact of rubber particles (RPs) on the performance of the concrete and the research topics have covered all the mechanical properties and durability of normal concrete (NC). Recently...

    Authors: Ling-Yun Feng, Ai-Jiu Chen and Han-Dong Liu
    Citation: International Journal of Concrete Structures and Materials 2022 16:25
  40. With the continuous development of economy, engineering construction is developing towards deep high-stress area, and the problems of large-deformation engineering are becoming more and more serious. Anchoring...

    Authors: Hai-feng Lu, Kai Zhang, Jin-long Yi and Ai-chao Wei
    Citation: International Journal of Concrete Structures and Materials 2022 16:24
  41. The mechanical properties of lightweight aggregate concrete developed with the use of bottom ash aggregate (LWAC-BA) as a partial or full replacement of lightweight aggregate differ from those of general light...

    Authors: Hye-Jin Lee, Sanghee Kim, Hak-Young Kim, Ju-Hyun Mun and Keun-Hyeok Yang
    Citation: International Journal of Concrete Structures and Materials 2022 16:23
  42. Concrete sewage structures are difficult to maintain since they are constructed under the ground and their surfaces inside are exposed to various deteriorations such as acid and sulfate ingress. In this study,...

    Authors: Hyun-Sub Yoon, Seung-Jun Kwon, Yong-Sik Yoon and Keun-Hyeok Yang
    Citation: International Journal of Concrete Structures and Materials 2022 16:22
  43. Manufacturing waste has been quickly increasing over time as a result of the fast-rising population as well as the consumption of foods that are thrown away dishonestly, resulting in environmental contaminatio...

    Authors: Jawad Ahmad, Rebeca Martinez-Garcia, Salem Algarni, Jesús de-Prado-Gil, Talal Alqahtani and Kashif Irshad
    Citation: International Journal of Concrete Structures and Materials 2022 16:21
  44. This paper investigates the effect of silica fume on the mechanical properties of metakaolin-based geopolymers with different silicon-to-aluminum molar (S/A) ratios. Geopolymer has been extensively studied as ...

    Authors: Sungwoo Park, Juan Yu, Jae Eun Oh and Sukhoon Pyo
    Citation: International Journal of Concrete Structures and Materials 2022 16:20
  45. The main objective of this study is to investigate the structural performance of reinforced concrete (RC) beam specimens strengthened with 3D-fiberglass as compared with fiber-reinforced polymers (FRP) sheets....

    Authors: Mahdi Vahidpour, Ali Kheyroddin and Mahdi Kioumarsi
    Citation: International Journal of Concrete Structures and Materials 2022 16:18
  46. Low-strength concrete (LSC) elements are prone to several seismic and static loads and are one of the priorities to be considered for FRP strengthening. However, certain provisions should be taken into account...

    Authors: Nima Hashemi, Sina Hassanpour and Asghar Vatani Oskoei
    Citation: International Journal of Concrete Structures and Materials 2022 16:17
  47. The technology of vibratory mixing has been applied to improve the compressive strength of cement-stabilized macadam (CSM). The aim of this study is to investigate the effect of vibration acceleration and ceme...

    Authors: Kaiyin Zhao, Lijun Zhao, Jinru Hou, Zhongxu Feng and Wenzhi Jiang
    Citation: International Journal of Concrete Structures and Materials 2022 16:16

Associated Society

e_logo_kci

International Journal of Concrete Structures and Materials is affiliated with Korea Concrete Institute.

Annual Journal Metrics

Who reads the journal?

Learn more about the impact the International Journal of Concrete Structures and Materials has worldwide

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline