Skip to main content
International Journal of Concrete Structures and Materials
International Journal of Concrete Structures and Materials Cover Image

Articles

Page 9 of 14

  1. This paper proposes an advanced near-surface-mounted (NSM) technique with an Fe-based shape-memory alloy (Fe-SMA) strip which can solve issues of low workability and reduced ductility of reinforced concrete (R...

    Authors: Kinam Hong, Sugyu Lee, Yeongmo Yeon and Kyusan Jung
    Citation: International Journal of Concrete Structures and Materials 2018 12:45
    Content type: Research article Published on:

  2. Hydraulic facilities are subjected to significant siltation which, in a very short period of time, can render them unusable. In Algeria, the silting-up of a great number of dams, built for drinking water needs...

    Authors: Omar Safer, Nadia Belas, Omar Belaribi, Khalil Belguesmia, Nasr-Eddine Bouhamou and Abdelkader Mebrouki
    Citation: International Journal of Concrete Structures and Materials 2018 12:44
    Content type: Original article Published on:

  3. To investigate the axial load behavior of hybrid concrete columns consisting of an ultra-high performance fiber-reinforced concrete tube (20 mm thick, 92.6 MPa or 143.3 MPa) and normal-strength concrete core (...

    Authors: Xiangguo Wu, Thomas H.-K. Kang, Issa Brown Mpalla and Chang-Soo Kim
    Citation: International Journal of Concrete Structures and Materials 2018 12:43
    Content type: Research Published on:

  4. Coupled shear walls are efficient in resisting lateral forces induced by winds and earthquakes. However, it is difficult to construct coupled shear walls particularly because current design codes require compl...

    Authors: Sang Whan Han, Jin-Wook Kang, Hyun-Woo Jee, Myoungsu Shin and Kihak Lee
    Citation: International Journal of Concrete Structures and Materials 2018 12:42
    Content type: Original article Published on:

  5. The purpose of this study is to investigate the flexural crack development of high-strength reinforced concrete (HSRC) beams and suggest the design equations of the flexural crack control for HSRC beams. This ...

    Authors: Chien-Kuo Chiu, Kai-Ning Chi and Bo-Ting Ho
    Citation: International Journal of Concrete Structures and Materials 2018 12:41
    Content type: Original article Published on:

  6. Durability of concrete and cementitious materials has been of a great concern to the construction industry in the last two decades due to the deterioration of large number of concrete structures which were bui...

    Authors: Ahmed Abdel-Mohti, Eslam Soliman and Hui Shen
    Citation: International Journal of Concrete Structures and Materials 2018 12:40
    Content type: Original article Published on:

  7. A full-scale jointed plain concrete pavement (JPCP) with two different dowel bar arrangements, namely, standard and special method, was constructed and evaluated under actual traffic-environmental condition in...

    Authors: Kukjoo Kim, Sanghyun Chun, Sangyoung Han and Mang Tia
    Citation: International Journal of Concrete Structures and Materials 2018 12:39
    Content type: Original article Published on:

  8. In current design codes, crack control design criterion for prestressed concrete (PSC) members is stricter than conventional reinforced concrete (RC) members. In particular, it is stipulated that the net tensi...

    Authors: Deuck Hang Lee, Sun-Jin Han, Hyo-Eun Joo and Kang Su Kim
    Citation: International Journal of Concrete Structures and Materials 2018 12:38
    Content type: Original article Published on:

  9. The innovative 3D printing has been successfully applied to layeredly build-up construction-scale structures through the extrusion of various cementitious materials. Favourable buildability of fresh cement mix...

    Authors: Zhijian Li, Li Wang and Guowei Ma
    Citation: International Journal of Concrete Structures and Materials 2018 12:37
    Content type: Original article Published on:

  10. The article handles potential approaches to design and determination of total load capacity of foundation slabs and floors. The research is focused on punching shear failure of reinforced ground supported slab...

    Authors: Oldrich Sucharda, Martina Smirakova, Jana Vaskova, Pavlina Mateckova, Jan Kubosek and Radim Cajka
    Citation: International Journal of Concrete Structures and Materials 2018 12:36
    Content type: Original article Published on:

  11. This paper presents the behaviour of potassium activators synthesized fly ash geopolymer containing carbon and basalt fibre at ambient and elevated temperature. Six series of fly ash based geopolymer were cast...

    Authors: Faiz Shaikh and Sharany Haque
    Citation: International Journal of Concrete Structures and Materials 2018 12:35
    Content type: Original article Published on:

  12. This study aimed to investigate the bond properties of prestressing strands embedded in ultra-high-performance fiber-reinforced concrete (UHPFRC). Toward this end, two types of prestressing strands with diamet...

    Authors: Hyun-Oh Shin, Seung-Jung Lee and Doo-Yeol Yoo
    Citation: International Journal of Concrete Structures and Materials 2018 12:34
    Content type: Original article Published on:

  13. U-shaped thin-walled concrete bridge beams usually suffer the combined actions of flexure, shear and torsion, but no research about the behavior of U-shaped thin-walled RC beams under combined actions has been...

    Authors: Jianchao Xu, Shenggang Chen, Quanquan Guo, Yinghua Ye, Bo Diao and Y. L. Mo
    Citation: International Journal of Concrete Structures and Materials 2018 12:33
    Content type: Original article Published on:

  14. An improved numerical model that can simulate the nonlinear behavior of reinforced concrete beams subjected to blast and impact loadings is introduced in this paper. The layered section approach is based in th...

    Authors: MinJoo Lee and Hyo-Gyoung Kwak
    Citation: International Journal of Concrete Structures and Materials 2018 12:32
    Content type: Original article Published on:

  15. This paper presents two shear tests of ¾-in. diameter cast-in anchors embedded in the plastic hinge zone of reinforced concrete columns. Design codes, such as ACI 318-14, require special reinforcement for conc...

    Authors: Derek Petersen, Zhibin Lin and Jian Zhao
    Citation: International Journal of Concrete Structures and Materials 2018 12:31
    Content type: Original article Published on:

  16. Assessment of concrete cover quality is necessary for proper maintenance of concrete structures. Concrete durability is evaluated primarily based on chloride penetrability, neutralization and other external fa...

    Authors: Dhruva Narayana Katpady, Hirotaka Hazehara, Masashi Soeda, Takashi Kubota and Satoshi Murakami
    Citation: International Journal of Concrete Structures and Materials 2018 12:30
    Content type: Original article Published on:

  17. This paper presents the strength and durability of cement mortars using 0–100% ferronickel slag (FNS) as replacement of natural sand and 30% fly ash or ground granulated blast furnace slag (GGBFS) as cement re...

    Authors: Ashish Kumer Saha and Prabir Kumar Sarker
    Citation: International Journal of Concrete Structures and Materials 2018 12:29
    Content type: Original article Published on:

  18. This paper investigates the effect of concrete degradation due to alkali-silica reactivity (ASR) and its effect on the performance of vertical concrete casks in the case of a hypothetical tip-over event. ASR i...

    Authors: Masoud Dehghani Champiri, Mir Mohammad Reza Mousavi, Kaspar Jodok Willam and Bora Gencturk
    Citation: International Journal of Concrete Structures and Materials 2018 12:28
    Content type: Original Article Published on:

  19. In this paper, an analytical model to rationally evaluate the shear strength of reinforced concrete beams with stirrups has been developed. In the developed model, a shear critical section has been idealized w...

    Authors: Esa Obande Jude, Chang-Hoo Oh and Seong-Cheol Lee
    Citation: International Journal of Concrete Structures and Materials 2018 12:27
    Content type: Original article Published on:

  20. Voided slab systems were developed using segmented void formers such as spherical or oval plastic balls for two-way slab applications. This type of slab is expected to behave like a general two-way reinforced ...

    Authors: Joo-Hong Chung, Hyung-Suk Jung, Baek-il Bae, Chang-Sik Choi and Hyun-Ki Choi
    Citation: International Journal of Concrete Structures and Materials 2018 12:26
    Content type: Original article Published on:

  21. Cemented paste backfill structures are complex underground cementitious structures. After fresh cemented paste backfill (CPB; a mix of tailings, binder and water) is poured into underground stopes (mined-out v...

    Authors: Liang Cui and Mamadou Fall
    Citation: International Journal of Concrete Structures and Materials 2018 12:25
    Content type: Original article Published on:

  22. High performance concrete especially self compacting concrete (SCC) has got wide popularity in construction industry because of its ability to flow through congested reinforcement without segregation and bleed...

    Authors: Dhanya Sathyan, Kalpathy Balakrishnan Anand, Aravind Jaya Prakash and Bhavukam Premjith
    Citation: International Journal of Concrete Structures and Materials 2018 12:24
    Content type: Original article Published on:

  23. Latex modified concrete (LMC) is used for a bridge deck pavement method that was introduced in Korea in the 2000s, and it is currently the concrete pavement method being used for most highway bridges. It has b...

    Authors: Byung Jae Lee and Yun Yong Kim
    Citation: International Journal of Concrete Structures and Materials 2018 12:23
    Content type: Original article Published on:

  24. Chloride attack is one of the most critical deterioration due to rapid corrosion initiation and propagation which can cause structural safety problem. Extended service life through repairing is very important ...

    Authors: Sang-Hwa Jung, Hyun-Min Yang, Keun-Hyeok Yang and Seung-Jun Kwon
    Citation: International Journal of Concrete Structures and Materials 2018 12:22
    Content type: Original Article Published on:

  25. Sandwich panels comprising prefabricated ultra-high performance concrete (UHPC) composites can be used as eco-friendly and multi-functional structural elements. To improve the structural and thermal performanc...

    Authors: Ji-Hyung Lee, Sung-Hoon Kang, Yu-Jin Ha and Sung-Gul Hong
    Citation: International Journal of Concrete Structures and Materials 2018 12:21
    Content type: Original Article Published on:

  26. Chloride ions diffuse through the concrete cover and interact with the cement hydration products. As a result, some chloride ions become chemically and/or physically bound. Free chloride ions are the primary c...

    Authors: Arturo Emanuel Ramírez-Ortíz, Francisco Castellanos and Prisciliano F. de J. Cano-Barrita
    Citation: International Journal of Concrete Structures and Materials 2018 12:20
    Content type: Original article Published on:

  27. Recycled aggregates (RAs) production techniques are essential for the material circulation society because RAs from demolished concrete waste can sustainably be reused as a concrete material. However, RAs can ...

    Authors: Hwa-Sung Ryu, Deuck-Mo Kim, Sang-Heon Shin, Seung-Min Lim and Won-Jun Park
    Citation: International Journal of Concrete Structures and Materials 2018 12:19
    Content type: Original article Published on:

  28. Efflorescence which severely occurs in alkali-activated slag cement can cause reduction of strength and durability due to calcium leaching. In the work, efflorescence characteristics in pavement containing red...

    Authors: Kim Hyeok-Jung, Suk-Pyo Kang and Gyeong-Cheol Choe
    Citation: International Journal of Concrete Structures and Materials 2018 12:18
    Content type: Original article Published on:

  29. Industrial wastes and recycled materials are being utilized in the construction industry for preserving the environment, saving of materials, and enhancing durability of the construction material. Blending of ...

    Authors: Sang-Hwa Jung, Velu Saraswathy, Subbiah Karthick, Palanivel Kathirvel and Seung-Jun Kwon
    Citation: International Journal of Concrete Structures and Materials 2018 12:17
    Content type: Original article Published on:

  30. Oxygen diffusion would not be important for healthy concrete. Once concrete is carbonated, however, oxygen diffusion is very crucial to lead reinforcement corrosion. Therefore, oxygen is always a potential thr...

    Authors: In-Seok Yoon
    Citation: International Journal of Concrete Structures and Materials 2018 12:16
    Content type: Original article Published on:

  31. ACI 318-14 and 423.7-14 require the use of encapsulation system for an unbonded single-strand tendon for the purpose of corrosion protection and enhanced durability. In this study, load-carrying performance an...

    Authors: Ah Sir Cho and Thomas H.-K. Kang
    Citation: International Journal of Concrete Structures and Materials 2018 12:15
    Content type: Original article Published on:

  32. Nuclear power plants are constructed very close to the marine environments for cooling water and the structures are more susceptible to chloride induced corrosion. Cracking in RC structures in mass concrete is...

    Authors: Sang-Hwa Jung, Hwa-Sung Ryu, Subbiah Karthick and Seung-Jun Kwon
    Citation: International Journal of Concrete Structures and Materials 2018 12:14
    Content type: OriginalPaper Published on:

  33. Calcium acetate, which can be used in concrete to shorten the construction period and to improve productivity, was manufactured using limestone sludge and acetic acid. Calcium acetate contains a carboxyl group...

    Authors: Hwa-Sung Ryu, Deuck-Mo Kim, Sang-Heon Shin, Won-Jun Park and Seung-Jun Kwon
    Citation: International Journal of Concrete Structures and Materials 2018 12:13
    Content type: Original article Published on:

  34. Slag can increase late age strength of concrete, but impairs the concrete early-age strength due to low reactivity. Limestone powder can increase early-age strength, but impairs late-age strength due to diluti...

    Authors: Xiao-Yong Wang and Yao Luan
    Citation: International Journal of Concrete Structures and Materials 2018 12:12
    Content type: Original article Published on:

  35. To investigate the load-carrying capacity of high-strength concrete-encased steel angle (CES-A) columns, in which corner steel angles are encased in concrete and transmit column loads directly, a numerical stu...

    Authors: Chang-Soo Kim and Hyeon-Jong Hwang
    Citation: International Journal of Concrete Structures and Materials 2018 12:11
    Content type: Original article Published on:

  36. Durability of reinforced concrete (RC) structures is affected by certain environmental conditions and operational actions which can reduce their lifetime significantly. Among these actions, this paper proposes...

    Authors: Emilio Bastidas-Arteaga
    Citation: International Journal of Concrete Structures and Materials 2018 12:10
    Content type: Original article Published on:

  37. The durability performance of stainless steel makes it an interesting alternative for the structural strengthening of reinforced concrete. Like external steel plates or fibre reinforced polymers, stainless ste...

    Authors: Hugo Biscaia, Noel Franco and Carlos Chastre
    Citation: International Journal of Concrete Structures and Materials 2018 12:9
    Content type: OriginalPaper Published on:

  38. Rehabilitation and repair of flexible pavements produce huge amounts of reclaimed asphalt pavement (RAP) material. Using RAP in the formulation of portland cement concrete (PCC) is a technique that is part of ...

    Authors: Sawssen El Euch Ben Said, Saloua El Euch Khay and Amara Loulizi
    Citation: International Journal of Concrete Structures and Materials 2018 12:8
    Content type: OriginalPaper Published on:

  39. Strut and Tie (S&T) models are used for the design of what are known as “discontinuity regions” in reinforced concrete (RC) structures. Building codes such as ACI-318 and Eurocode 2 do not give information on ...

    Authors: Manuel Alejandro Fernández-Ruiz, Luisa María Gil-Martín and Enrique Hernández-Montes
    Citation: International Journal of Concrete Structures and Materials 2018 12:7
    Content type: OriginalPaper Published on:

  40. This paper presents a study on the bond characteristics of glass fiber reinforced polymer (GFRP) bars in engineered cementitious composite (ECC). Ninety beam specimens having variable parameters namely bar dia...

    Authors: Khandaker Muhammed Anwar Hossain
    Citation: International Journal of Concrete Structures and Materials 2018 12:6
    Content type: Original article Published on:

  41. This paper presents the results of the tests and analysis on the coefficient of thermal expansion for the steel strand under combined low temperatures and prestressing forces. A test program was firstly carrie...

    Authors: Jian Xie and Jia-Bao Yan
    Citation: International Journal of Concrete Structures and Materials 2018 12:5
    Content type: Original article Published on:

  42. This study investigated the strength developments and deformation characteristics of methyl methacrylate (MMA)-modified vinyl ester polymer concrete, with MMA contents and curing temperatures as test variables...

    Authors: Nan Ji Jin, Jaeheum Yeon, Seung-Ho Min and Kyu-Seok Yeon
    Citation: International Journal of Concrete Structures and Materials 2018 12:4
    Content type: OriginalPaper Published on:

  43. It is generally recognized that cracks provide easy access to ingress of chlorides in concrete and hence, the initiation of corrosion of steel in cracked concrete occurs at early stage. However, wide variety ...

    Authors: Faiz Uddin Ahmed Shaikh
    Citation: International Journal of Concrete Structures and Materials 2018 12:3
    Content type: Original Article Published on:

  44. The purposes of this study were to investigate the seasonal variations in the relative permittivity of actual concrete bridge decks of various ages on Korea expressways, and to propose a practical way to calib...

    Authors: Ji-Young Rhee, Seong-Hoon Kee, Hong-Sam Kim and Jae-Jin Choi
    Citation: International Journal of Concrete Structures and Materials 2018 12:2
    Content type: Original article Published on:

  46. Insulating concrete is a material designed to reduce heat conduction with pores/insulations, and these pores strongly affect the material characteristics. In general, the insulation effect is directly proporti...

    Authors: Sang-Yeop Chung, Mohamed Abd Elrahman and Dietmar Stephan
    Citation: International Journal of Concrete Structures and Materials 2017 11:218
    Content type: OriginalPaper Published on:

  47. In this work, pozzolanic activities of dredged sea soil from two different sources (South Harbor at Busan and Jangsaengpo Harbor at Ulsan) in Republic of Korea were investigated. Dredged sea soil used for this...

    Authors: Hoon Moon, Ji-Hyun Kim, Jae-Yong Lee, Soo-Gon Kim and Chul-Woo Chung
    Citation: International Journal of Concrete Structures and Materials 2017 11:215
    Content type: OriginalPaper Published on:

  48. Amorphous micro-steel (AMS) fibre made by cooling of liquid pig iron is flexible, light and durable to corrosion, then to be compatible with high flowable and disperable states of mixing as well as high ductil...

    Authors: Jeong-Su Kim, Chang-Geun Cho, Hyeong-Joo Moon, Hoyeon Kim, Seung-Jung Lee and Wha-Jung Kim
    Citation: International Journal of Concrete Structures and Materials 2017 11:214
    Content type: OriginalPaper Published on:

  49. This study introduces a glass fiber reinforced polymer (GFRP)-steel hybrid bar with a core of a deformed steel bar (steel core). Six types of the hybrid cross section were considered, and a total of 48 tensil...

    Authors: Minkwan Ju, Sangyun Lee and Cheolwoo Park
    Citation: International Journal of Concrete Structures and Materials 2017 11:212
    Content type: OriginalPaper Published on:

  50. Recently, extreme climate change has been occurring globally not only in the simple form of temperature increases but also in a wide range of extreme climatic events, such as abnormal drought conditions and fr...

    Authors: Tae-Kyun Kim, Seung-Jai Choi, Jang-Ho Jay Kim, Yong-Sik Chu and Eunjong Yu
    Citation: International Journal of Concrete Structures and Materials 2017 11:206
    Content type: OriginalPaper Published on:
Submit manuscript

Associated Society

e_logo_kci

International Journal of Concrete Structures and Materials is affiliated with Korea Concrete Institute.

Annual Journal Metrics

  • 2023 Citation Impact
    3.6 - 2-year Impact Factor
    3.8 - 5-year Impact Factor
    1.634 - SNIP (Source Normalized Impact per Paper)
    1.061 - SJR (SCImago Journal Rank)

    2023 Speed
    24 days submission to first editorial decision for all manuscripts (Median)
    129 days submission to accept (Median)

    2023 Usage 
    556,138 downloads
    19 Altmetric mentions

Who reads the International Journal of Concrete Structures and Materials

Who reads the journal?

Learn more about the impact the International Journal of Concrete Structures and Materials has worldwide

Follow

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline

  • ISSN: 2234-1315 (electronic)